Loading
Sistema AT
  • Home
  • System of AT Implants
    • Implants
    • Pins
    • Telescopic crowns
    • System components
      • Components for implant insertion
      • Components for pin insertion and prosthetisation
    • Quality and certification
  • System of materials for regeneration
    • Collagene AT
    • Idrossilapatite AT
    • Warning and instruction for use
    • Technical sheets
    • Quality and certification
  • A-Z Products
  • Online order
  • Contact us
  • Search
  • Menu Menu

AT pins

AT transmucosal pins

The transmucosal pins fit perfectly into the inner bore of the corresponding implants and are cemented in exactly the same way as abutment pins with parallel walls and an antirotation tip.

AT implant exposure for transmucosal pin cementing normally occurs after three to four months for the upper arch and five to six months for the lower arch.

For long implantsRef. code
7 mm3050
8 mm3062
9 mm3063
10 mm3052
11 mm3064
12 mm3065
13 mm3054
14 mm3066
15 mm3067
16 mm3056
17 mm3068
18 mm3069
19 mm3058
20 mm3070
21 mm3071
22 mm3060

Millable AT transmucosal pins

Millable transmucosal pins have a longer eccentric tip than normal transmucosal pins.

Millable transmucosal pins fit inside the inner bore of the corresponding implants and their tip can be milled by up to 3 mm in order to obtain a full range of intermediate lengths.

For long implantsRef. code
10 mm3051
13 mm3053
16 mm3055
19 mm3057
22 mm3059
22 mm extralungo3061

AT3 grip transmucosal pins

AT3 grip transmucosal pins make post parallelisation easier than ever before, because once they have been bent by up to 90 degrees, they can be rotated to any angle before being cemented, as their tip is flat rather than eccentric; their deeper portion features microretentions with a specific particle size for improved adhesion to the cement and they have a groove on the tip similar to that of precision connectors for enhanced short-implant retention.

AT3 grip transmucosal pins are hi-tech products manufactured using an innovative particularly ductile and bioinert type of surgical steel with quality control guaranteed by the Italian National Institute of Health. Despite having been developed specifically for AT3 grip implants, they are also compatible with all earlier AT implants.

These extremely compact prosthetic posts allow dental technicians maximum cosmetic versatility in all positions on the arch.

For long implantsRef. code
7 mm3401
8 mm3402
9 mm3403
10 mm3404
11 mm3405
12 mm3406
13 mm3407
14 mm3408
15 mm3409
16 mm3410
17 mm3411
18 mm3412
19 mm3413
20 mm3414
21 mm3415
22 mm3416

This post is also available in: Italian

Centro di Odontoiatria Operativa S.r.l.

Via Facciolati, 57 – 35127 Padova PD
Telefono: +39 049681123 – +39 0498808661

e-mail: info@odopguizza.it – odopguizza@legalmail.it

Home
Products
Privacy Policy

© Copyright 2023 - CENTRO DI ODONTOIATRIA OPERATIVA S.R.L. - P. Iva: 01385450281
  • design: Barcellan
Scroll to top
  • Italiano
  • English